|
|
|
|
Exterior Paint and Customer Protection
Cool N Lite®
CrystGard™
protection
film is probably the most effective way of
protecting your vehicles from road damages
such as stone chips, debris and scratches.
This patented acrylic adhesive paint
protection is designed to protect cars,
motorcycles, trucks, vans, boats, watercraft
and other types of vehicles.
CrystGard™
forms an invisible exterior protection that
can be waxed and maintained just like your
paint to maintain the original high gloss
shine of modern vehicles.
Paint Protection |
|
|
|
Help protect your factory paint from sand,
stones, insects and other road debris that
can chip, stain and scratch the finish. It's
constructed from a high-grade transparent
urethane film with UV inhibitors that help
prevent yellowing. The Paint protection film
helps maintain resale value of your vehicle
and watercrafts.
|
Once installed,
CrystGard™
invisibly and permanently protects
the vehicle from scratches, stone
chips and other blemishes caused by
everyday use.
|
 |
CrystGard™
will withstand lubricants, oils, UV rays,
and unlike the competition, also contains an
anti-corrosion polymer which inhibits rust
and mold growth.
 |
CrystGard™
can also be applied on lamp units
without affecting light
transmission. |
|
Features |
Withstand extreme hot or cold
temperatures
and high humidity. |
| |
Ultra transparent |
| |
Strong adhesion, removes without
residue |
| |
Extremely flexible, to conform on
curve surface with no wrinkle or
creep under professional
installation |
| |
Superior anti-corrosion formulation
|
| |
Virtually invisible, CrystGard™does
not alter the aesthetics of the
vehicle |
| |
Maintenance Free |
| |
Retains high gloss |
CrystGard™
Physical Properties
|
PERFORMANCE TEST |
TEST CONDITION |
RESULTS |
|
Tensile Strength |
ASTM D 882 |
60 Mpa |
|
Elongation |
ASTM D 882 |
760% |
|
Tear Strength |
ASTM D 1938 |
10.5 kg |
|
Peel Strength In Heat |
168 hours at 70° C |
800 N/m |
|
Peel Strength In Humidity |
168 hours in 95% RH |
800 N/m |
|
Weathering In Heat |
168 hours in 70° C |
No Change |
|
Weathering In Humidity |
168 hours in 95% RH |
No Change |
|
Weathering Corrosion |
24 hours in salt spray |
No Change |
|
Weathering Xenon Arch |
1250 KJ/M 2 |
No Change |
|
Outdoor Exposure |
24 hr in 40° C water |
No Change |
|
Paint Chipping |
Gravelometer SAE J4000 |
Pass |
|
Wear Resistance |
Taber Abrasion |
No wear through |
|
Shrinkage |
30 minutes at 120° C |
<1% |
Base film 8.0 mil
Adhesive 2.0 mil
Release liner 3.0 mil
CrystGard™
has a lifetime guaranty against yellowing,
bubbling or cracking.
|
|
