SOLAR FILM
WITH A DIFFERENCE
| HOME | BENEFITS |
INSTALLATION CENTRE |
SOLAR FILM CONSTRUCT |
QUALITY ASSURANCE |
FAQ |
CONTACT US |
|
|
|
|
|
|
Your new tinted windows will take about 3 to 5 days to fully dry, sometimes a lot longer depending on film brand, type, and weather conditions. Until this time your tinted windows may appear hazy or lumpy, and it may seem to have water bubbles. Do not roll your tinted windows down until dry! |
||
| Cleaning |
Tinted windows may be cleaned
with a soft clean cloth and alcohol based cleaner or plain water. Ammonia
products should not be used. |
||
| Black dotted edges |
Most cars have a black ceramic
'frit' edge on the rear window. Sometimes this ceramic edge is straight and
flat, sometimes it will have a dotted edge. These black ceramic dots are
quite thick on most cars and prevent the film from sticking to the area
between the dots. This results in a whitish looking strip trimming the
glass. Typically this isn't very noticeable, however some cars have a wide
band of dots trimming the top of the rear window. This area is so wide that
the whitish looking area created is more pronounced. Unfortunately, the
effect is unavoidable. |
||
| Seat Belt Chips |
Caution should be used when
releasing seat belts. Small chips can be made in the tint due to the seat
belt hitting the glass as it is released,
THIS IS NOT COVERED BY
WARRANTY. |
||
| Imperfections |
Though we strive for
perfection in our installations, due to the nature of the product, some
degree of dust contamination and or minor imperfections could be present in
some tint application, also pre-existing flaws or scratches and metal deposits on
the glass are often much more noticeable after the windows are tinted. Small silvery looking spots or 'metal rubs' on some windows are usually found in station wagons or other utillity vehicles, and are caused by a metalic object (such as a baby stroller handle) rubbing against the inner surface of the glass during travel. This rubbing deposits metal onto the glass creating a silver or grey stain. Usually these these metal rubs aren't very noticeable and often aren't noticed until the windows become tinted.
|
||
| Demister Distortion |
At night you may notice that
the light form headlights will reflect off of the defogger lines. This is
caused by the film having to bend slightly around the raised defogger line,
it varies from car to car, and there is nothing that can be done about it.
|
||
| HOME | BENEFITS |
INSTALLATION CENTRE |
SOLAR FILM CONSTRUCT |
QUALITY ASSURANCE |
FAQ |
CONTACT US |
21 Toh Guan Road
East #01-15 Toh Guan Centre Singapore 608609 Tel:(65)67629885
Fax:(65)67629887
COPYRIGHT 2003 © COOL N LITE SOLAR FILM PTE LTD